Search EDA360 Insider
Hey!!! Subscribe now to the EDA360 Insider!
-
Recent Posts
- A head-to-head comparison of the ARM Cortex-M4 and –M0 processor cores by Jack Ganssle
- Friday Video: SoC in tiny 500mg backpack transforms cockroach into radio-controlled exploration vehicle
- Friday Video: A different kind of fab with some very, very cool machines
- Friday Video: Get the latest skinny on the IPC-2581 open interchange standard for PCB design
- Smartphones: Where PCIe has not gone before—but will. Sooner rather than later.
EDA360 Tag Cloud
- 2.5D
- 3D
- 3D IC
- 20nm
- 28nm
- 32nm
- 40nm
- Agilent
- Altera
- AMD
- Analog
- Android
- Apple
- ARM
- ARM architecture
- ARM Cortex-A15
- ASIC
- Broadcom
- Cadence
- Canon
- Cortex
- Cortex-A15
- Cortex-M0
- DAC
- Dave Jones
- DDR3
- DDR4
- Double Patterning
- EDA
- EDPS
- Field-programmable gate array
- FinFET
- Flash
- Flash memory
- FPGA
- Freescale
- Freescale Semiconductor
- GlobalFoundries
- IBM
- Intel
- IP
- iPad
- iPhone
- JEDEC
- Jim Hogan
- Kinect
- Linux
- Low Power
- Lytro
- microcontroller
- Micron
- Microsoft
- Mixed Signal
- Multi-core processor
- Nvidia
- OrCAD
- pcb
- Printed circuit board
- Qualcomm
- Robot
- Samsung
- SDRAM
- Snapdragon
- SoC
- STMicroelectronics
- SystemC
- Texas Instruments
- TI
- TSMC
- USB
- verification
- video
- Wide I/O
- Xilinx
Top Posts
- A head-to-head comparison of the ARM Cortex-M4 and –M0 processor cores by Jack Ganssle
- Ingenious architectural features allow ST to extract maximum performance from new microcontroller family based on ARM Cortex-M4. Cost: less than 6 bucks in 1000s
- ARM Cortex-A15—does this processor IP core need a new category…Superstar IP?
- Are FinFETs inevitable at 20nm? “Yes, no, maybe” says Professor Chenming Hu
- Collaboration is key to making DFM work at 28nm and below
- EDA360 and the brand new Hewlett-Packard 15C Limited Edition RPN pocket scientific calculator
- 3-processor SoC for digital still cameras incorporates an ARM 1136J-S RISC processor core plus separate image and video processors
- The WORD on ARM’s big.LITTLE Cortex-A15/A7 design philosophy from Jack Ganssle, a leading expert and consultant on embedded design and firmware development
- Download a free PDF of the Mixed-signal Methodology Guide, Chapter 1: Design Trends and Challenges
Download the EDA360 Vision Paper here:
Tag Archives: EEVblog
Friday Video: What’s the difference between a bare PCB made in China and one made in New Zealand?
Same design, two PCB fabricators. What’s the difference? Is there one? Well, yes. Dave Jones of EEVblog takes 16 minutes to walk you through some of the differences he observes in his prototype power supply board from two vendors in … Continue reading
Posted in EDA360, pcb, System Realization
Tagged Dave Jones, EEVblog, pcb, Printed circuit board
Leave a comment
Friday Video: Are apps just for Smartphones? Nope. Take a look at this EEVblog video of new firmware for the Agilent InfiniiVision 3000X DSO
Say “apps” and smartphones likely come to mind immediately. No wonder, since that’s how most of us interact with apps on a daily basis. As all sorts of devices get smarter and smarter, the concept of apps-driven design—fundamental to EDA360—makes … Continue reading
Posted in Apps, EDA360, Firmware, System Realization
Tagged 3000X, Agilent, EEVblog, InfiniiVision
Leave a comment
