Search EDA360 Insider
Hey!!! Subscribe now to the EDA360 Insider!
-
Recent Posts
- A head-to-head comparison of the ARM Cortex-M4 and –M0 processor cores by Jack Ganssle
- Friday Video: SoC in tiny 500mg backpack transforms cockroach into radio-controlled exploration vehicle
- Friday Video: A different kind of fab with some very, very cool machines
- Friday Video: Get the latest skinny on the IPC-2581 open interchange standard for PCB design
- Smartphones: Where PCIe has not gone before—but will. Sooner rather than later.
EDA360 Tag Cloud
- 2.5D
- 3D
- 3D IC
- 20nm
- 28nm
- 32nm
- 40nm
- Agilent
- Altera
- AMD
- Analog
- Android
- Apple
- ARM
- ARM architecture
- ARM Cortex-A15
- ASIC
- Broadcom
- Cadence
- Canon
- Cortex
- Cortex-A15
- Cortex-M0
- DAC
- Dave Jones
- DDR3
- DDR4
- Double Patterning
- EDA
- EDPS
- Field-programmable gate array
- FinFET
- Flash
- Flash memory
- FPGA
- Freescale
- Freescale Semiconductor
- GlobalFoundries
- IBM
- Intel
- IP
- iPad
- iPhone
- JEDEC
- Jim Hogan
- Kinect
- Linux
- Low Power
- Lytro
- microcontroller
- Micron
- Microsoft
- Mixed Signal
- Multi-core processor
- Nvidia
- OrCAD
- pcb
- Printed circuit board
- Qualcomm
- Robot
- Samsung
- SDRAM
- Snapdragon
- SoC
- STMicroelectronics
- SystemC
- Texas Instruments
- TI
- TSMC
- USB
- verification
- video
- Wide I/O
- Xilinx
Top Posts
- A head-to-head comparison of the ARM Cortex-M4 and –M0 processor cores by Jack Ganssle
- Ingenious architectural features allow ST to extract maximum performance from new microcontroller family based on ARM Cortex-M4. Cost: less than 6 bucks in 1000s
- Collaboration is key to making DFM work at 28nm and below
- Experimental , ultra-low-power 1.2V, 65nm SoC from ST and MIT operates at 82.5MHz (!) maximum, 540KHz at 0.54V
- Want more information on the ARM Cortex-M0+ processor core?
- Asymmetric, dual-core NXP LPC4300 microcontrollers split tasks between ARM Cortex-M4 and -M0 cores, cost $3.75 and up
- How about a quick and easy guide to ARM Cortex processor cores? Got one for you from ARM TechCon 2011
- Friday Video: Gary Smith speaks at DAC 2011 about IP (very large and modifiable) and platform-based design
- 3-processor SoC for digital still cameras incorporates an ARM 1136J-S RISC processor core plus separate image and video processors
- Friday Video: Mr. 3D IC, Herb Reiter, speaks about his start with 3D, where it is, where it’s going
Download the EDA360 Vision Paper here:
Advertisements
