Search EDA360 Insider
Hey!!! Subscribe now to the EDA360 Insider!
-
Recent Posts
- A head-to-head comparison of the ARM Cortex-M4 and –M0 processor cores by Jack Ganssle
- Friday Video: SoC in tiny 500mg backpack transforms cockroach into radio-controlled exploration vehicle
- Friday Video: A different kind of fab with some very, very cool machines
- Friday Video: Get the latest skinny on the IPC-2581 open interchange standard for PCB design
- Smartphones: Where PCIe has not gone before—but will. Sooner rather than later.
EDA360 Tag Cloud
- 2.5D
- 3D
- 3D IC
- 20nm
- 28nm
- 32nm
- 40nm
- Agilent
- Altera
- AMD
- Analog
- Android
- Apple
- ARM
- ARM architecture
- ARM Cortex-A15
- ASIC
- Broadcom
- Cadence
- Canon
- Cortex
- Cortex-A15
- Cortex-M0
- DAC
- Dave Jones
- DDR3
- DDR4
- Double Patterning
- EDA
- EDPS
- Field-programmable gate array
- FinFET
- Flash
- Flash memory
- FPGA
- Freescale
- Freescale Semiconductor
- GlobalFoundries
- IBM
- Intel
- IP
- iPad
- iPhone
- JEDEC
- Jim Hogan
- Kinect
- Linux
- Low Power
- Lytro
- microcontroller
- Micron
- Microsoft
- Mixed Signal
- Multi-core processor
- Nvidia
- OrCAD
- pcb
- Printed circuit board
- Qualcomm
- Robot
- Samsung
- SDRAM
- Snapdragon
- SoC
- STMicroelectronics
- SystemC
- Texas Instruments
- TI
- TSMC
- USB
- verification
- video
- Wide I/O
- Xilinx
Top Posts
- A head-to-head comparison of the ARM Cortex-M4 and –M0 processor cores by Jack Ganssle
- Ingenious architectural features allow ST to extract maximum performance from new microcontroller family based on ARM Cortex-M4. Cost: less than 6 bucks in 1000s
- ARM furthers its “cover the earth” strategy with introduction of R5 and R7 core variants for fast, real-time, deterministic SoC applications
- EDA360 and the brand new Hewlett-Packard 15C Limited Edition RPN pocket scientific calculator
- Welcome to 3D Week: Why is 3D important? Now? The memory wall, heat, and disposable sensors
- Realizing the ARM Cortex-A15: What does the road to 2.5GHz look like?
- ARM adds ARM Cortex-A15 and Cortex-R5 models to Fast Models 6.1 release, making these cores immediately available to System Realization teams
- Friday Video: Want the basics of PCB design in 45 minutes? Dave Jones delivers yet again with a free tutorial.
Download the EDA360 Vision Paper here:
Tag Archives: Microelectromechanical systems
3D Thursday: MEMS is yet another kind of 3D. EDA entrepreneur Jim Hogan speaks about MEMs.
Yesterday, Cadence hosted a mini conference on MEMS (microelectromechanical systems) with MEMS EDA vendor Coventor. EDA Investor and industry gadabout Jim Hogan gave the keynote and Coventor VP of engineering Steve Breit filled the audience in on some technical details. … Continue reading
Posted in 3D, EDA360, Silicon Realization, System Realization
Tagged Jim Hogan, MEMS, Microelectromechanical systems, TSMC
Leave a comment
EDA360 Insider 