Search EDA360 Insider
Hey!!! Subscribe now to the EDA360 Insider!
-
Recent Posts
- A head-to-head comparison of the ARM Cortex-M4 and –M0 processor cores by Jack Ganssle
- Friday Video: SoC in tiny 500mg backpack transforms cockroach into radio-controlled exploration vehicle
- Friday Video: A different kind of fab with some very, very cool machines
- Friday Video: Get the latest skinny on the IPC-2581 open interchange standard for PCB design
- Smartphones: Where PCIe has not gone before—but will. Sooner rather than later.
EDA360 Tag Cloud
- 2.5D
- 3D
- 3D IC
- 20nm
- 28nm
- 32nm
- 40nm
- Agilent
- Altera
- AMD
- Analog
- Android
- Apple
- ARM
- ARM architecture
- ARM Cortex-A15
- ASIC
- Broadcom
- Cadence
- Canon
- Cortex
- Cortex-A15
- Cortex-M0
- DAC
- Dave Jones
- DDR3
- DDR4
- Double Patterning
- EDA
- EDPS
- Field-programmable gate array
- FinFET
- Flash
- Flash memory
- FPGA
- Freescale
- Freescale Semiconductor
- GlobalFoundries
- IBM
- Intel
- IP
- iPad
- iPhone
- JEDEC
- Jim Hogan
- Kinect
- Linux
- Low Power
- Lytro
- microcontroller
- Micron
- Microsoft
- Mixed Signal
- Multi-core processor
- Nvidia
- OrCAD
- pcb
- Printed circuit board
- Qualcomm
- Robot
- Samsung
- SDRAM
- Snapdragon
- SoC
- STMicroelectronics
- SystemC
- Texas Instruments
- TI
- TSMC
- USB
- verification
- video
- Wide I/O
- Xilinx
Top Posts
- A head-to-head comparison of the ARM Cortex-M4 and –M0 processor cores by Jack Ganssle
- Ingenious architectural features allow ST to extract maximum performance from new microcontroller family based on ARM Cortex-M4. Cost: less than 6 bucks in 1000s
- ARM furthers its “cover the earth” strategy with introduction of R5 and R7 core variants for fast, real-time, deterministic SoC applications
- EDA360 and the brand new Hewlett-Packard 15C Limited Edition RPN pocket scientific calculator
- Welcome to 3D Week: Why is 3D important? Now? The memory wall, heat, and disposable sensors
- Realizing the ARM Cortex-A15: What does the road to 2.5GHz look like?
- ARM adds ARM Cortex-A15 and Cortex-R5 models to Fast Models 6.1 release, making these cores immediately available to System Realization teams
- Friday Video: Want the basics of PCB design in 45 minutes? Dave Jones delivers yet again with a free tutorial.
Download the EDA360 Vision Paper here:
Tag Archives: Stan Williams
Do you think Moore’s Law has become irrelevant? “Yes,” says HP Research Fellow Stan Williams
Thanks to this article from TechEye.Net, I was alerted to an extremely interesting roundtable discussion organized by the Kavli Foundation by three long-range nanotechnology research experts. The three experts are HP Research Fellow Stan Williams, director of the company’s Cognitive … Continue reading
Posted in EDA360, Silicon Realization, System Realization
Tagged California Institute of Technology, California NanoSystems Institute, Fred Kavli, HP, Kavli Foundation, Kavli Trust, Memristor, nanotechnology, Stan Williams, University of California, University of California Los Angeles, University of New South Wales
2 Comments
EDA360 Insider 