Search EDA360 Insider
Hey!!! Subscribe now to the EDA360 Insider!
-
Recent Posts
- A head-to-head comparison of the ARM Cortex-M4 and –M0 processor cores by Jack Ganssle
- Friday Video: SoC in tiny 500mg backpack transforms cockroach into radio-controlled exploration vehicle
- Friday Video: A different kind of fab with some very, very cool machines
- Friday Video: Get the latest skinny on the IPC-2581 open interchange standard for PCB design
- Smartphones: Where PCIe has not gone before—but will. Sooner rather than later.
EDA360 Tag Cloud
- 2.5D
- 3D
- 3D IC
- 20nm
- 28nm
- 32nm
- 40nm
- Agilent
- Altera
- AMD
- Analog
- Android
- Apple
- ARM
- ARM architecture
- ARM Cortex-A15
- ASIC
- Broadcom
- Cadence
- Canon
- Cortex
- Cortex-A15
- Cortex-M0
- DAC
- Dave Jones
- DDR3
- DDR4
- Double Patterning
- EDA
- EDPS
- Field-programmable gate array
- FinFET
- Flash
- Flash memory
- FPGA
- Freescale
- Freescale Semiconductor
- GlobalFoundries
- IBM
- Intel
- IP
- iPad
- iPhone
- JEDEC
- Jim Hogan
- Kinect
- Linux
- Low Power
- Lytro
- microcontroller
- Micron
- Microsoft
- Mixed Signal
- Multi-core processor
- Nvidia
- OrCAD
- pcb
- Printed circuit board
- Qualcomm
- Robot
- Samsung
- SDRAM
- Snapdragon
- SoC
- STMicroelectronics
- SystemC
- Texas Instruments
- TI
- TSMC
- USB
- verification
- video
- Wide I/O
- Xilinx
Top Posts
- A head-to-head comparison of the ARM Cortex-M4 and –M0 processor cores by Jack Ganssle
- Ingenious architectural features allow ST to extract maximum performance from new microcontroller family based on ARM Cortex-M4. Cost: less than 6 bucks in 1000s
- What do you do when two processors just won’t do? TI’s OMAP 5 SoCs sport 4-in-hand ARM cores, IP Subsystems
- Friday Video (late): Fully operational “Lost in Space” B9 Robot, $24500
- 3D Thursday: Generation-jumping 2.5D Xilinx Virtex-7 2000T FPGA delivers 1,954,560 logic cells using 6.8 BILLION transistors (UPDATED!)
- The WORD on ARM’s big.LITTLE Cortex-A15/A7 design philosophy from Jack Ganssle, a leading expert and consultant on embedded design and firmware development
- Between ASIC and microcontroller: It’s all about System Realization
- The DDR4 SDRAM spec and SoC design. What do we know now?
- Collaboration is key to making DFM work at 28nm and below
- 10 ways to get your EDA tools to run faster, smoother, and longer
Download the EDA360 Vision Paper here:
Tag Archives: Entrepreneur
Jim Hogan wants to give you the secrets of raising funds for an EDA startup. Free!
On October 17, Jim Hogan’s second “conversation” in his Emerging Companies Series will deal with a key topic for EDA entrepreneurs: “How to Raise Money and How Not to Spend It.” Hogan’s guests include Amit Gupta, President and CEO of … Continue reading
Posted in EDA360
Tagged Angel investor, Business, EDA, Entrepreneur, Hogan, Jim Hogan
Leave a comment